More random props...

Just some more assorted props I've made for the international stop-motion co-op project. The measurements on the set-square are in inches.

Here is some tiny crocheted stuff. The blanket, pillow and cushion were made with a 1mm hook, the doily in the second photo was made with a 0.6mm hook. They took nearly as long to make as they would have done if they were full size because they contain almost the same number of stitches!

Here are a couple of rather contemporary looking stools I made. The seat cushions are hand crocheted and the bases are just frosted glass jars turned upside down:

Here is a tea-set. It's a bit too small for the scale of the rest of the set, so maybe it's an espresso set. I just used a 'Disney fairies' doll's china tea-set from the pound-shop, peeled off the fairy stickers and drew flowers on with Sharpie markers. I sealed the surface using an acrylic based varnish:

I also made a bowl of 'monster fruits' using a little glass sauce-dish and an assortment of glass and wooden beads with green neoprene stalks:

I'm off to London on Wednesday for 6 days, for a marathon of museum and art gallery visiting, and also to meet up with James Geard, director of 'Walter Gloom', to talk about film stuff.

I won't have any internet access, so I apologise in advance for not replying to any emails for a while.

Props, cheap LEDs and fuzzy boobs!

I just thought I'd post some photos of various props I've made over the last few weeks. Most of them are for the international animation co-operative set up by John Hankins (castlegardener).

The first few are some wooden toys made from wooden bits and bobs I had in my hoard of useful junk:

And this is my idea of what a Bubo (Clash of the Titans) bean-bag toy would look like. He's made of painted polymer clay:


And here's another silly stop-motion reference. Two plates with sheep on (ok, so I didn't 'make' them, I just drew on two plain doll's plates with Sharpie markers, then varnished them):

The other things I've been working on are some working table-lamps. I got an bargain on some ultra-bright LEDs in a variety of colours from a website called http://www.phenoptix.co.uk/ who even sell blue and white LEDs for less than 14p each! That's ridiculously cheap, especially for those colours... I remember back when I was doing AS-level electronics in the late 90s, blue LEDs cost about £3 each and white LEDs hadn't even been invented... ahhhh, so long ago...

The website also sells great value resistors, which you need to prevent the LEDs being destroyed by the 9V circuits I wire them into. Great service too - if you need LEDs, I highly recommend them (they ship internationally too). The LEDs are really powerful (especially the white ones) and give a narrow 20 degree beam of light. They are so bright that I think I could probably use them as small spot-lights for lighting areas of my sets, which is great because they run for ages on a 9V circuit, they come in loads of colours, they don't flicker and they don't heat up!

Anyway, I used yellow LEDs in these two table lamps, to be placed in a sunny yellow coloured set. The lamps are made from glass beads and hollow wooden bases all glued together with epoxy. I soldered a 3mm yellow LED with a resistor into a circuit with a PP3 clip for a 9V battery, then covered all the exposed wires with heat-shrink tubing, with more heat-shrink over the top of that to turn the two seperate wires into one cable going from the lamp (the batteries will be hidden, obviously). I glued the LED into the bottom of the hole through the centre of the lamp, and put a 'plug' of tin foil fixed with epoxy into the hole at the top of the lamp to act as a reflector bouncing light back into the lamp.

I also made this lamp, to go in a set with a blue colour scheme, using a 3mm white LED. Most white LEDs give off a blue tinged light, and this one looks extra blue because of the blue glass in the lamp. It gives out about 3 times as much light as the yellow lamps, so I hope it won't be too overpowering!

Oh, and one last completely unrelated picture:

Yup, that's what woolly alien glamour model looks like, just in case you ever wondered...

It's for the cover of a magazine prop in 'Monday to Friday'.

If it arouses you (and you aren't a woolly alien yourself) you should probably be concerned!

Finally, some alien industral set photos!

At last, here they are, some photos of my woolly monsters in their finished alien technology set, ready to animate! The photos were taken using my new FZ50 and you can click on them to see the BIG versions on flickr:











It's probably best not to ask what the heck is going on in the last photo!

More prop and scenery construction

I have my first commission, woohoo! It's a short (less that 15 seconds) slot for a music video. I've been given total creative freedom, so I am having a lot of fun with the set and puppet designs. I am setting it on an alien planet, so I can go wild with the plants and scenery which, for me anyway, is all very exciting!

I have also been constructing props and scenery for the short I am planning to make with the samurai puppet that John Hankins sent me. This project is currently on hold though until I finish the commission. I made John a rather endearing puppet and sent it to him the other day, but I can't say any more about it until it arrives in Hawaii because I don't want to spoil John's surprise.

Here are some photos of the scenery I have made so far for the samurai animation, which will be set in a garden. Please note that I am going for a very stylised look - these aren't meant to be realistic! Sorry about the bad photos. My studio has no natural light (for animation purposes) so I took them with a flash, and they don't look great.

These are some fruit trees for the background of the scene. They are wire covered in papier-mache then painted. The foliage is made of snipped up green pan scourers, and the fruits are yellow plastic ball bearings (for shooting from BB guns).


These are ornamental rose trees made from builders 'mice' wire (usually used in reinforced concrete) wrapped round papier-mache balls, which have been painted green. Then I glued on paper leaves and ribbon roses.

Here are an assortment of background bushes. They are papier-mache again. The two on the left are covered in three shades of embroidery silk snipped up and layered with Copydex (liquid latex). The one on the right is snipped up pan scourers. The 'flowers' are pearlescent seed beeds.

This is a garden ornament or memorial of some description. It's a small plastic tub with a cotton reel, a thimble, a button and a dome headed nut glued to the top of it (all junk I have collected over the years), then painted to look like marble and bronze (sort of).

The great thing about all these bits of scenery is that they are made of junk and very cheap materials. My boyfriend gave me a bucket of steel wire 'mice' as a present (other women get flowers, I get builders tools and materials - which is good because I do prefer getting random hardware) so that was free. The papier-mache is obviously just old newpapers and watered down cheap PVA glue. The green pan scourers, yellow plastic BBs and embroidery silks were bought in bulk packs from £1 shops. The silk roses were 3p each from the sewing stall on Bolton market. The most expensive material was the Copydex, which was £4 for a small bottle, but for future Copydex purchases I have found a supplier where I can buy the stuff in 1 litre and 5 litre bottles at a discount price.

I'm mid-way through making some alien plants for the commissioned animation. Here are the photos of how I made the basic structures:

These are some bobbly plants which are made from some round door knobs I got in a bulk value pack from B&Q and those useful little yellow BBs again. I had to use good old fashioned 'strong glue' for sticking the balls on, as with PVA and Copydex the set up time was too long and superglue was not tacky enough (too watery). The strong glue worked well, as it partially melted the plastic coating on the doorknobs, which seemed to increase the 'grab' and reduce the set up time of the glue. One thing I would advise - don't make 6 of these in an unventilated room like I did. After a while those little BBs looked like they were moving around of their own accord and the next morning I had a banging hangover. In future I will dig out my vapour mask to use for jobs like this!

These plants will be painted with layers of coloured liquid latex, to make them look shiny, rubbery and...well...like alien plants I suppose.

This is a slightly out of focus photo of some alien trees. They are 'tumble drier balls' (£1 shop) with trunks made from wire coated in epoxy putty. As you can see, they are being painted with layers of purple liquid latex. Details will be added later with a contrasting shade of liquid latex.

I will post photos of the finished alien plants soon.

I have also made a space castle or an elaborate rocketship (or whatever you want it to be) to go in the background.

It is a bizarre combination of interesting bits and bobs I have collected over the years. Two wooden door knobs, a cedarwood moth repellant disk thingy, some wooden cocktail forks, two glue tube lids and an assortment of different beads. It was decorated with acrylic paint and plastic 'gems'.